Think of heat-shrink tubing as the duct tape for electrical wiring on the factory floor. Heat-shrink tubing is versatile, easy to use, and finds wide applicability in maintenance and repair.They are used for preventive maintenance to avoid problems, and it is a wonderful tool for making minor repairs to cables and connectors.
Various
Zero halogen
Low smoke generation if burning
Operating temperature: -55°C to +125°C
Minimum shrink temperature: 70°C
Minimum fully recovery temperature: 100°C
Approvals: UL 224 125°C VW-1 1000 V
Standard colors: Black, red, blue, yellow, green, white. Other colors available on request.
Shrink ratio: 2:1
Products features
Top quality polyolefin heat shrinkable tubing for general purpose use.
A full range of all colors in the most popular small sizes.
Suitable for electrical insulation, wire bundling, colour coding, mechanical protecting, wire/cable joints and repairs etc.
Good electrical, mechanical and chemical performance.
Ideal for Hobbyists and Model Makers, Electrical, Electronic, Automotive and General Purpose uses.
Application guidelines
Make sure you have the right tubing for your needs. It’s a good idea to keep and assortment of tubing handy for maintenance and repair work. Vendors like Alpha Wire offer kits containing a variety of sizes and colors. Use a tubing diameter that will not provide full shrinking. If you are repairing a damaged jacket, make sure the cable is otherwise still in good shape. Make sure the insulation around separate conductors is not harmed and that there is no possibility of shorts or opens. Likewise, make sure that conductors are not nicked.
Product Diemensions
Property |
Test Method |
Typical Data |
Operating temperature |
UL 224 |
-55°C to + 125°C |
Tensile strength |
ASTM D 2671 |
>14 MPa |
Elongation at break |
ASTM D 2671 |
400% |
Longitudinal shrinkage |
UL 224 |
0±5% |
Eccentricity |
ASTM D 2671 |
<30% |
Flammability |
VW-1 |
Pass |
Dielectric strength |
IEC 243 |
>20 KV/mm |
Volume resistance |
IEC 93 |
1014Ω.cm |
Copper stability |
UL224 |
Pass |
Heat aging / Tensile strength / Ultimate elongation |
158°C/168h |
Unaged / >12 MPa / >350% |
Dimensions/2X
Size | As Supplied (mm) |
After Recovery (mm) |
Standard length |
||
DM-T125 |
Inside Diameter |
Wall Thickness |
Inside Diameter |
Wall Thickness |
|
Special Type |
0.5 |
0.15 |
0.2 |
0.22 |
200 |
0.6 |
0.15 |
0.3 |
0.22 |
200 |
|
0.8 |
0.15 |
0.4 |
0.22 |
200 |
|
3/64 |
1.2 |
0.18 |
0.6 |
0.30 |
200 |
1/16 |
1.6 |
0.18 |
0.8 |
0.33 |
200 |
3/32 |
2.4 |
0.25 |
1.2 |
0.36 |
200 |
1/8 |
3.2 |
0.25 |
1.6 |
0.44 |
200 |
3/16 |
4.8 |
0.25 |
2.4 |
0.55 |
200 |
1/4 |
6.4 |
0.25 |
3.2 |
0.55 |
200 |
3/8 |
9.5 |
0.3 |
4.8 |
0.55 |
100 |
1/2 |
12.7 |
0.35 |
6.4 |
0.65 |
100 |
5/8 |
16 |
0.35 |
8 |
0.69 |
100 |
3/4 |
19.1 |
0.40 |
9.5 |
0.89 |
100 |
1 |
25.4 |
0.45 |
12.7 |
0.90 |
50 |
1 1/4 |
32 |
0.45 |
16 |
0.90 |
50 |
1 1/2 |
38.1 |
0.50 |
19.1 |
1.00 |
50 |
2 |
50.8 |
0.50 |
25.4 |
1.00 |
25 |
3 |
76.2 |
0.55 |
38.1 |
1.20 |
25 |
4 |
100 |
0.55 |
50.8 |
1.30 |
25 |
5 |
120 |
0.55 |
63 |
1.40 |
25 |
6 |
150 |
0.55 |
75 |
1.40 |
25 |
7 |
180 |
0.55 |
90 |
1.40 |
25 |
8 |
210 |
0.55 |
105 |
1.40 |
25 |
9 |
230 |
0.55 |
115 |
1.40 |
25 |
10 |
250 |
0.55 |
125 |
1.40 |
25 |
http://www.wiresleeves.com/